Filter
Top Products
44
DIRECT PRINTING
PRINTER UTILITIES
You may use a range of supported printer utilities.
PRINTER UTILITIES
1. Press the PRINT button to change the display to DIRECT
PRINTING mode.
Press the MACRO button to return to PLAYBACK mode.
2. Use the ud buttons to select the print option, then press the PRINT
button.
3. Press the MENU button or the FLASH button to go to PRINT
SETUP.
Press the MENU button or the MACRO button to return to step
2
.
4. Press the r button to go to the "Utility" screen.
Press the l button to go to the 'Print Setup' screen.
The next steps are all continued from step
5
.
TEST PRINTING FOR NOZZLE CHECK
You can use the "Nozzle Check" to test the printer when there is a problem
with the printed image.
5. Use the ud buttons and select "Nozzle Check".
Press the MENU button or the MACRO button to return to step
2
.
6. Press the FLASH button.
The message "Print a Nozzle Check pattern? Load A4 or Letter size
paper." will appear on the monitor. Place the paper in the printer and
then press the FLASH button to print the Nozzle Check pattern.
To check the printed Nozzle Check pattern, or to fix any gaps, refer to the
instructions provided with your printer.
ALERT
If the printer you are using does not support the Nozzle Check feature, the message
"This function cannot be performed from the camera with the printer you are using."
will appear on the monitor. In this case refer to the printer manual.
HEAD CLEANING
If the printed images appear smudged or the printing is patchy, use this
utility to clean the printer head.
5. Use the ud buttons and select "Head Cleaning".
Press the MENU button or the MACRO button to return to step
2
.
6. Press the FLASH button.
At this time the message "Clean the print head?" will appear on the
monitor.
Press the FLASH button to begin the head cleaning process.
ALERT
If the printer you are using does not support the Head Cleaning feature, the message
"This function cannot be performed from the camera with the printer you are using."
will appear on the monitor. In this case refer to the printer manual.
Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.
PRINT button
FLASH button
MENU button
MACRO button
l button
u button
r button
d button