Filter
Top Products
Maintenance and Troubleshooting 54
Problems and Solutions
Use the information in this section to diagnose problems
and find solutions.
Power Problems
Some errors occurred
while deleting files. The
operation was canceled.
Some files were skipped. The
memory card may be
write-protected. Check the
memory card and try again.
There is no response from
the printer.
Make sure the USB cable is
connected correctly. Check your
printer.
You must set the date and
time to ensure correct
operation.
Set the correct date and time.
(See page 51.)
Wait until the P-4000 cools
down.
The battery power is running
out. Charge the battery. See
“Charging the Battery” on
page 10 for details.
Press the Reset button. See
“Resetting the P-4000” on
page 57 for instructions.
Error message Description
The power does not turn on.
Cause What to do
The battery has run out. When the icon appears on
the top right corner of the LCD,
the battery has run out. See
“Charging the Battery” on page 10
and charge the battery.
The battery is not installed
correctly.
Make sure the battery is installed
correctly. See “Installing the
Battery” on page 9.
The P-4000 may have shut
off automatically to save
battery power.
Slide the power switch down to
turn the P-4000 back on.