Epson PM 225 Photo Printer User Manual


 
32
PictureMate’s handle makes it easy to carry short
distances. If you have the optional battery, you can use
PictureMate just about anywhere, even if an electrical
outlet is not available.
Tip: You can order an optional PictureMate Carrying Case (part
number PMBAG06) or rechargeable battery (part number
C12C831082) from Epson. See page 46 for details.
Packing Your PictureMate
If PictureMate is going to travel a longer distance, pack
it carefully to help protect it from getting damaged.
Caution: Keep PictureMate out of the sun and don’t leave it in
your car or other location where it can get too hot or too cold.
PictureMate may be damaged or ink may leak.
1 Press the P On button to turn PictureMate off.
2 Wait until the On light goes out, then unplug the
power cable from the power outlet.
3 Remove all paper and printed photos.
4 Lower the screen, then close the paper support
and output tray.
5 Unplug the power adapter and any connected
USB cable or device. Place the power cable and
adapter in the PictureMate accessory box.
6 Pack PictureMate in the box that it came in or the
optional carrying case.
Caution: Make sure the photo cartridge is installed. Do not
remove the photo cartridge before transporting. Don’t place
PictureMate on its side or upside down, or ink may leak.
Note: If your prints don’t look as good after PictureMate has
been moved, try aligning the print head (see page 39).
Take PictureMate With You