Filter
Top Products
74 Printing on CDs and DVDs
Adjusting the Print Density
If ink smears on your printed CDs or DVDs, you may need to adjust the color
saturation or ink density. Discs from different manufacturers absorb ink differently,
so you may need to adjust the density for each type of disc. Follow the instructions
here to print a color saturation check pattern and make adjustments as necessary.
Note: You can also use the Brightness and Contrast settings in Epson Print CD to
adjust color saturation. See page 66 for instructions.
Windows
1. Insert a test CD or DVD for printing, as described on page 63.
2. Start Epson Print CD.
3. Select Print from the File menu.
4. Click the Printer Settings button.
5. Make sure your printer is selected
and the Source is set to Manual,
then click OK.
6. Click the Print Density
Confirmation
Pattern button.
7. Click OK.
8. After the pattern is printed, select
Print from the File menu.
9. Examine the print and adjust the Print Color Correction slider to a lighter or
darker setting as necessary.
10. You can print three density patterns on one disc, each in a different location.
Insert the disc again and press the ) paper button. Then click the Second
button and click OK to print the second pattern.
If you print a third pattern, repeat steps 8 to 10, but select the Third button.
11. Remove the CD or DVD and let it dry for at least 24 hours. Then check the
saturation levels again.