Filter
Top Products
125
Viewing Images
6
124
●
!
Movies and images with CCD-RAW cannot be printed.
●
!
Images photographed with a camera other than FinePix
S9100 / FinePix S9600 may not be printed.
5
1Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3Always press the “MENU/OK” button after the
settings are completed.
SHEETSSHEETS
TOTALTOTAL
:00009
01
YESYES CANCELCANCEL
FRAMEFRAME
01 02 03
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
6
“PRINT OK?” appears on the screen. Press the
“MENU/OK” button to begin printing.
Disconnecting the printer
1Check that “PRINTING” is not displayed on the
camera’s screen.
2Turn the camera off. Unplug the USB cable
(mini-B).
USB socket
(mini-B)
7
Printer starts printing the specified number of
prints.
●
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
PRINTINGPRINTING
CANCELCANCEL
1/9
SHEETSSHEETS
CANCELCANCEL
PRINT OK?PRINT OK?
TOTAL:TOTAL:
9
SHEETSSHEETS
YES YES
CANCEL CANCEL
PICTBRIDGEPICTBRIDGE
1
4
3
2
SETSET
SETSET
ENGLISHENGLISH
OKOK
SETSET
:
:
:
:
:
:
01 03
6.2.2 Specifying images for printing without using DPOF
(
single-frame printing
)
AC-5VX
USB socket
(mini-B)
2
1Connect the camera to the printer using the USB
cable (mini-B).
2Turn the printer on.
3
Set the Power switch to “w”.
“CHECKING USB” appears and then the menu is
displayed on the screen.
●
!
If the menu does not appear, check whether the “ò” USB
MODE setting is
“
®”
PICTBRIDGE.
●
!
Depending on the printer, some functions are disabled.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
●
!
Use a media that was formatted on FinePix S9100 / FinePix
S9600.
1Set the Power switch to “w” to turn the camera
on.
2Select “®” PICTBRIDGE in “ò” USB MODE
in the “˜” SET-UP menu (➡P.100).
3Set the Power switch to “OFF” to turn the
camera off.
●
!
Do not connect to a PC when the “ò” USB MODE setting is
set to “
®” PICTBRIDGE. See P.146 if you connect to a PC
by mistake.
1
02
CHECKING USBCHECKING USB
PICTBRIDGEPICTBRIDGE
●
!
“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
4
1Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2Press “c”.
01 02
PRINT WITHOUT DATEPRINT WITHOUT DATE
PRINT DPOFPRINT DPOF
OKOK
PICTBRIDGEPICTBRIDGE
PRINT WITH DATEPRINT WITH DATE