Filter
Top Products
12 13
Getting Ready
1
Load the batteries correctly as indicated by the
polarity icons.
2
1
Check that the camera is turned off (set the Power
switch to “OFF”) before opening the battery cover.
●
!
If opening the battery cover while the camera is still on, the
camera will turn off.
●
!
Do not apply force to the battery cover.
Do not open the battery cover while the camera is
on. This could damage the media or ruin the image
files on the media.
Compatible batteries
hAA-size alkaline batteries (4) or AA-size Ni-MH rechargeable batteries (4) (sold separately)
●
!
Use the same brand and grade AA-size alkaline batteries as those supplied with the camera.
◆
How to use the batteries
◆
hNever use the following types of batteries, as they could cause serious
problems such as battery fluid leakage or overheating:
1. Batteries with split or peeling outer casings
2. Combinations of different types of batteries or new and used batteries
together
hDo not use manganese or Ni-Cd batteries.
hSoil, such as fingermarks on the poles of the batteries can shorten time for which the batteries
can be used.
hThe time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries)
can be used varies depending on the brand. Some brands of alkaline batteries may stop providing
power more quickly than those supplied with the camera. Note also that due to their nature, the
time for which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to
+50°F). The use of AA-size Ni-MH batteries is better for this reason.
hUse Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.
hSee P.137-138 for other notes on using batteries.
hWhen first purchased or if left unused for a long period, the amount of time which AA-size
Ni-MH batteries can be used may be short. See P.138 for more information.
Outer casing
LOADING THE BATTERIES
Press on the battery cover to push the batteries
down.
Slide the cover closed.
3
When attaching the lens hood, it is effective for
reducing ghost images and flare in backlit scenes.
Camera provides crisp, clear shots.
1Align the indicators on the camera and lens
hood, and fit the lens hood to the lens.
2Turn the lens hood clockwise until it clicks.
02
Attaching the lens hood
◆
Storing lens hood
◆
As in storing lens hood into the soft case, the lens
hood can be attached upside down.
ATTACHING THE STRAP, LENS CAP AND LENS HOOD
01
●
!
The lens hood cannot be attached when the optional wide-
angle conversion lens is used.