Filter
Top Products
47
3
46
●
!
“¨” appears on the LCD monitor during
shooting.
●
!
You cannot use the flash in this mode.
●
!
The speed of continuous shooting remains the same
regardless of the resolution setting.
●
!
The shots should be taken using the viewfinder.
●
!
The results of the shot are displayed even when
“POSTVIEW” is set to OFF (➡P.73).
●
!
The exposure is set when the first frame is shot and
cannot be changed during shooting.
●
!
If there is not enough free space on the xD-Picture
Card for 2 frames, only one frame is shot.
When “2-frame Continuous Shooting” is set to
ON, the “t” icon appears on the LCD monitor.
2-frame continuous shooting continues while the
shutter button is pressed down fully. When you
take the shots, the photographed images are
displayed and automatically recorded.
This mode can be selected in the “
|”, “W” still
photography modes.
Two successive frames can be shot at up to 2
frames per second.
1
✽ Displaying the menus (➡P.42)
t
CONTINUOUS SHOOTING
PHOTOGRAPHY MENU
=
SELF-TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU
3
The self-timer lamp lights steadily for roughly 5
seconds and then blinks for another 5 seconds,
after which the shot is taken.
A counter on the LCD monitor counts down the
time until the shot is taken.
Self-timer mode is automatically cancelled after
each shot.
●
!
To stop the self-timer once it has started running,
press the “BACK” button.
4 2