Filter
Top Products
Indicator
Indicator
Battery release catch
Battery
13
1
12
1Align the gold mark on the xD-Picture Card
slot with the gold contact area on the xD-
Picture Card and then push the card firmly all
the way into the slot.
2Close the battery cover.
●
!
If you open the battery cover while the camera is still
switched on, the camera is automatically switched
off to protect the xD-Picture Card.
●
!
The xD-Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply undue force to the xD-Picture Card.
●
!
When storing xD-Picture Card, always use the
special anti-static case provided.
Open the battery cover, move the battery
release catch aside and take out the battery.
●
!
Always switch the camera off when replacing the
battery.
◆
Removing the battery
◆
1Slide the battery cover out to open it.
2Insert the battery so that the indicators are
aligned and the battery release catch is
pushed aside.
●
!
Do not apply excessive force to the battery cover.
01
02
LOADING THE BATTERY AND xD-Picture Card
xD-Picture Card slot
Gold marking
01
02
◆
Replacing an xD-Picture Card
◆
When you push the xD-Picture Card into the slot
and then slowly remove your finger, the lock is
released and the xD-Picture Card is pushed out.
You can then pull the xD-Picture Card the rest of
the way out.
Do not open the battery cover while the camera
is still switched on. This could damage the xD-
Picture Card or corrupt the image files on the
xD-Picture Card.
●
!
Take care not to remove
your finger too quickly
after the lock is released,
as the card may spring
completely out of the slot.