Filter
Top Products
75
6
74
g POWER SAVE
SET–UP
To bring the camera out of sleep mode so that it
is ready to shoot, press “d”, “c”, “a” or “b”.
This is useful since the camera is ready to shoot
more quickly than when it is switched off and
then on again. You can also take pictures when
the camera is in sleep mode simply by pressing
the shutter button.
●
!
You can also bring the camera out of sleep mode by
pressing buttons other than “d”, “c”, “a” or “b”.
◆
To restore power to the camera
◆
12
The Sleep function does not operate when the LCD monitor is switched off or when
the camera is in Setup or Playback mode. However, if the camera controls are not
used for some time (2 minutes or 5 minutes), the camera automatically switches off.
If the camera has been automatically switched off, switch it back on by moving the
Power switch to the OFF position 1 briefly and then back to ON 2.
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 minutes or 5
minutes), it is automatically switched off. Use
this function when you want to get the maximum
possible running time from the battery.
●
!
Power Save is disabled when the camera is connected
to a USB port.
Software needed for playing back movies, etc.
Launches the FinePixViewer
software when a camera is
connected.
Software used to read PDF-format documents on a
personal computer. This software is needed to read the
User’s Guides for FinePixViewer.
Creates a FinePix CD Album.
Used for videoconferencing (Windows only)
Allows you to display thumbnail lists of the
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.
✽ Note that the software configuration differs slightly depending on your operating system.
Connect the camera
with “DSC” selected as
the USB setting
(➡P.88).
Connect the camera
with “PC CAM”
selected as the USB
setting (➡P.91).
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
Allows a digital camera to be
used as a PC Camera.
ImageMixer VCD
for FinePix
FinePixViewer
PictureHello
Acrobat Reader
R R
QuickTime
USB PC Camera
Driver
Exif Launcher
USB Mass Storage
Driver
6 Software Installation
6.1 The Software Components