FujiFilm FinePixF402 Digital Camera User Manual


 
111110
Notes on the Power Supply
AC Power Adapter
Use only the AC-5VS/AC-5VHS AC Power Adapter
with your FinePix F402 Digital Camera. The use of
other AC power adapters may result in damage to your
camera.
hThe AC Power Adapter is only intended for indoor
use.
hPush the connection cord plug firmly into the DC input
socket.
hWhen unplugging the connector cord, switch the
camera off and pull out the plug by grasping the plug
itself. (Do not pull on the cord.)
hDo not use the AC power adapter with any device
except the specified device.
hDuring use, the AC power adapter will become hot to
the touch, but this is normal.
hDo not disassemble the AC power adapter. Doing so
could be dangerous.
hDo not use the AC power adapter in a place with high
temperature and high humidity.
hDo not drop or subject the AC power adapter to
strong shocks.
hThe AC power adapter may emit a humming noise,
but this is normal.
hIf used near a radio, the AC power adapter may
cause static, so play the radio in a distant place.
Very occasionally, DC output will be prevented by the
operation of the internal protection circuit. In this
event, unplug the AC-5VS/AC-5VHS AC power
adapter from the power socket for a few moments
and then plug it in again. This will restore DC output.
Specifications (AC-5VS/AC-5VHS)
Power Supply AC 100V to 240V, 50/60Hz
Rated Input Capacity 12W (U.S.A. and Canada)
0.15A to 0.24A (other countries)
Rated Output
DC 5.0V 1.5A (U.S.A. and Canada)
DC 5.0V 2.0A (other countries)
Temperature During Use
0°C to +40°C (+32°F to +104°F)
(U.S.A. and Canada)
0°C to +45°C (other countries)
Storage Temperature
-10°C to +70°C (+14°F to +158°F)
Dimensions (MAX.) 47 mm × 20 mm × 72 mm
(1.9 in. × 0.8 in. × 2.8 in.)
(W × H × D) (U.S.A. and Canada)
49 mm × 40 mm × 65 mm
(W × H × D) (U.K.)
49 mm × 31 mm × 65 mm
(W × H × D) (other countries)
Mass (Weight) Approx. 120 g (4.2 oz.)
(U.S.A. and Canada)
Approx. 200 g (7.0 oz.) (U.K.)
Approx. 180 g (6.4 oz.)
(other countries)
Connection Cord Length
Approx. 2 m (6.6 ft.)
Please note that specifications and characteristics are
subject to change without notice.
into a fire.
h Do not attempt to disassemble or modify the battery.
h Do not recharge the battery with chargers other those
specified.
h Dispose of used batteries promptly.
To avoid damaging the battery or shortening its
life, observe the following:
h Do not drop the battery or otherwise subject it to
strong impacts.
h Do not immerse the battery in water.
To ensure that you obtain optimum battery
performance, observe the following:
h Always keep the battery terminals clean.
h Store the battery in a cool, dry place. Storing the
battery for long periods in a hot location can shorten
the battery life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This is
normal and is not a malfunction. Use the AC power
adapter supplied with the camera if you are taking
pictures or viewing images for a long period of time.
Specifications of the Enclosed NP-40
Nominal voltage DC 3.7V
Nominal capacity 710 mAh
Operating temperature
0°C to +40°C (+32°F to +104°F)
Dimensions 35.3 mm × 40 mm × 6 mm
(1.39 in. × 1.6 in. × 0.24 in.)
(W × H × D)
Mass (Weight) Approx. 20g (0.7 oz.)
These specifications are subject to change without notice.
h The NP-40 may feel warm after it has been charged or
immediately after being used. This is perfectly normal.
h Do not recharge a fully charged NP-40.
Battery Life
At normal temperatures, the NP-40 can be used at
least 300 times.
If the time for which the NP-40 provides power shortens
markedly, this indicates that the NP-40 has reached the
end of its effective life and should be replaced.
Lithium-ion Battery Pack NP-40 is both compact and
capable of storing large quantities of power. However, if
It is stored for long periods while charged, the
performance of the battery can be impaired.
h If the battery will not be used for some time, run the
battery flat before storing it.
h Always remove the battery from the camera or battery
charger when it is not being used.
h Place the battery pack inside the soft case and store
in a cool place.
The battery should be stored in a dry location with an
ambient temperature between +15°C and +25°C
(+59°F and +77°F).
Do not leave the battery in hot or extremely cold places.
Handling the Battery
To avoid injury or damage, observe the following:
h Do not allow the metal portions of the battery to touch
other metal objects.
h Do not bring the battery close to a flame or throw it
Notes on storage