Filter
Top Products
18
USING THE AC POWER ADAPTER
1
19
LOADING THE SmartMedia
™
03
Connecting the AC-5V AC Power Adapter to
your camera allows you to take pictures or play
back images (using a TV connection, etc.)
without worrying about the battery running out.
You can also use the AC power adapter to
recharge the camera’s battery, making it very
convenient for travelling, etc.
●
Compatible AC power adapters
Model: AC-5VS/AC-5VH (provided as an
accessory or sold separately)
●
!
Problems arising through the use of products other
than genuine FUJIFILM products are not covered by
your warranty.
●
!
See P.116 for additional notes on the AC power
adapter.
Check that the camera is switched off. Open the
terminal cover and plug the AC power adapter
connector into the “DC IN 5V” socket. Then plug
the AC power adapter into a power outlet.
DC IN 5V
Socket
●
!
Images cannot be recorded or erased if a write-
protect sticker is affixed to the SmartMedia.
●
!
Operation of this camera is only guaranteed when it
is used with FUJIFILM SmartMedia.
●
!
Some 3.3V SmartMedia are labelled as “3V” or “ID”
cards.
●
!
See P.117, 118 for more information on SmartMedia.
➀
Check that the camera is switched off and
open the slot cover.
➁
Push the SmartMedia firmly into the SmartMedia
slot as far as it will go.
➂
Close the slot cover.
●
!
If you open the slot cover while the camera is
switched on, the camera is automatically switched
off to protect the SmartMedia.
●
!
The SmartMedia will not slide fully into the slot if it is
inserted facing the wrong way. Be careful not to
apply undue force to the SmartMedia.
SmartMedia
™
■Only use 3.3V SmartMedia
MG-4S ( 4MB), MG-16SW (16MB, ID)
MG-8S ( 8MB), MG-32SW (32MB, ID)
MG-16S (16MB), MG-64SW (64MB, ID)
MG-32S (32MB), MG-128SW (128MB, ID)
MG-64S (64MB)
●
➂
●
➀
●
➁