Filter
Top Products
3
7170
When you take a picture, the resulting shots are
displayed (Acorrect exposure, B overexposed,
Cunderexposed) and then automatically saved.
●
!
The focus is determined for the first frame and
cannot be changed during shooting.
●
!
The photographed images are displayed even when
“OFF” is selected as the “IMAGE DISPLAY” setting”
(➡ P.98).
●
!
It takes about 12 seconds to record the image data
(NORMAL:
G).
If you want to select the shots to be recorded,
see P.98.
This mode can be selected in the “
9 • 0 • - •
3” photography modes.
Use this feature to photograph the same image
with different exposure settings. Auto bracketing
automatically shoots 3 consecutive frames, one
of which is correctly exposed while the
remaining two are underexposed and
overexposed respectively by a set amount.
●
The three available settings are ±1/3, ±2/3 and
±1 EV. See P.112 for more information on EVs.
This mode can be selected in the “
9 • 0 • - • 3”
photography modes.
Use this setting when you want to take bright
pictures indoors without using a flash or when
you want to use a fast shutter speed. (to prevent
camera shake, etc.)
●
Settings: 100, 200, 400
●
!
Flash photography cannot be used.
●
!
This feature always takes 3 shots. However, if there
is insufficient space on the SmartMedia for 3 shots,
no picture will be taken.
R
SETTING THE SENSITIVITY
|
AUTO BRACKETING
PHOTOGRAPHY MENU PHOTOGRAPHY MENU
Continuous shooting
Auto bracketing
Blank(OFF)
After selecting AUTO BRACKETING, press the
“6” button so that the “” icon appears on the
screen. The mode switches (6 ••Blank)
each time you press the “6” button.
21 3