Filter
Top Products
3
7574
MODE SELECT
F
ISO
AUTO
3 41 2
This mode can be selected in the “9 • 0 • - • 3”
photography modes.
Set this setting to “ON” when you are using an
external flash.
●
Synchronization speed: Up to 1/1000 sec.
➀
Close the built-in flash.
➁
Mount the external flash on the camera’s hot
shoe.
●
!
Built-in and external flash units cannot be used at
the same time.
◆
Compatible Flash Units
◆
Flash units that can be used with this camera
must meet the following 3 conditions :
●
The aperture can be set.
●
External flash synchronization can be used.
●
The sensitivity can be set.
●
!
Set the white balance (➡P.66) to AUTO or Custom
White Balance (➡P.76).
Select “9 • 0 • -” (➡P.44) or “3” (➡P.46).
However, the use of “-” or “3” mode is
recommended.
When you are using an external flash, always
specify a fixed aperture setting.
External Flash Settings
For external flash, refer to the user’s manual for the
flash and specify the settings as described below.
●
Match the settings to the camera aperture
setting. In “9” or “0” mode, match the settings
to the aperture measured by the camera.
●
Match the sensitivity setting (➡P.70) to the
setting on the camera.
●
Select External Flash mode (TTL mode cannot
be used).
●
!
Flash photography cannot be used when continuous
shooting (➡P.61) or auto bracketing (➡P.70) is
selected.
●
➀
●
➁
?
USING AN EXTERNAL FLASH
PHOTOGRAPHY MENU