Filter
Top Products
61
Advanced Features
3
60
H FOCUSING
Available Photography mode:
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject near the center of the image.
When the camera has difficulty focusing on the
subject in AF (MULTI) mode, set the focusing mode
to AF(CENTER) and use AF/AE Lock (➡P.26).
AF
(
MULTI
)
Press the shutter button down halfway. The camera
recognizes any strongly contrasting subject near
the center of the LCD monitor and displays the AF
frame over subject in focus.
●
!
When taking pictures in Macro mode, the camera focuses on
the center of the LCD monitor.
AF
(
CENTER
)
The camera focuses on the center of the LCD
monitor. Use this setting when taking pictures using
AF/AE lock (➡P.26).
MF
(
Manual Focus
)
AF AREA
AF
(
MULTI
)
AF
(
CENTER
)
When there is no high-contrast subject
in the center of the LCD monitor
For a high-contrast subject in
the center of the LCD monitor
You cannot check the focus when taking pictures
using the viewfinder.
After taking the picture, play it back to check the
focus.
Continued
3
When the correct exposure is measured,
“p” appears.
Press the “MENU/OK” button to confirm the setting.
●
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is removed.
●
!
After taking the picture, check the “Color (White Balance)”
setting for the image.
i Set “IMAGE DISP.” to “PREVIEW” in the “SET-UP” screen
(➡P.87).
i Set the Power switch to “
w” (➡P.29).
●
!
See P.52 for information on Continuous AF.
When “y” or “u” appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when “y” appears and a
positive value (+) when “u” appears.
or
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
◆
Example
◆
You can change the white balance for a photographed image by using colored paper instead of white
paper.
✽ Displaying the menus (➡P.57)