Filter
Top Products
77
Advanced Features
3
Total number of prints
Total number of prints
Setting for that frame
4
1Press “d” or “c” to display the frame (file) for
which you want to specify DPOF settings.
2Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
●
!
Prints of up to 999 image frames (files) can be ordered on the
same xD-Picture Card.
●
!
DPOF settings cannot be specified for movie and CCD-RAW.
5
Always press the “MENU/OK” button (or “p”
button) after the settings are completed.
Pressing the “DISP (BACK)” button, no DPOF
settings are specified.
01 02
Pressing the “DISP (BACK)” button during the
settings, all the new settings are cancelled. If there
were previous DPOF settings, only the
modifications are cancelled.
◆
Canceling a frame
◆
To cancel the DPOF setting for a frame (file) you
have specified (cancel frame), perform steps
1 to 3
and then:
1Press “d” or “c” to select the frame (file) with
the DPOF setting you want to cancel.
2Set the number of prints to 0(zero).
To cancel the DPOF setting for another frame (file),
repeat steps 1 and 2.
Press the “MENU/OK” button (or “
p” button) to
complete the settings.
76
1
1Set the Power switch to “w”.
2Press the “p” button.
01 02
Press “d” or “c” to select “u” DPOF.
2
3
1Press “a” or “b” to select “WITH DATE” or
“WITHOUT DATE”. Selecting “WITH DATE” will
cause the date to be imprinted on your prints.
2Press the “MENU/OK” button.
01 02
●
!
When selecting the “WITH DATE” setting, the date is
imprinted on your shots using the Print Service or a DPOF-
compatible printer (depending on the printer specifications,
the date may not be printed in some cases).
“u” appears on the LCD monitor during playback
when the image has specified with DPOF setting.
u DPOF SET FRAME
p PHOTO MODE PLAYBACK
◆
When DPOF settings were specified on another camera
◆
When the data includes a frame (file) with DPOF
setting that were specified on another camera,
“
4” appears.
Pressing the “MENU/OK” button (or “
p” button)
erases all of the DPOF settings already specified for
each frame (file). Specify the DPOF setting for each
frame (file) again.
●
!
Press the “DISP (BACK)” button to leave the previous
settings unchanged.