Filter
Top Products
91
Settings
4
CCD-RAW
Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received
from the CCD as an image) performed on the camera. Consequently, this task must be performed
on the PC.
Use the bundled RAW FILE CONVERTER LE software to perform the processing on a PC.
Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format
images.
✽ To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your PC.
■ The functions listed below cannot be used in CCD-RAW mode.
During shooting
Widescreen mode shooting, Digital zoom, Continuous shooting and FinePix Photo mode
(image quality, sensitivity (ISO 800) and FinePix COLOR) are unavailable.
During playback
Playback image quality is fixed at 2 (1600 × 1200).
Playback can be zoomed up to approx. 11.9×, but trimmed images cannot be saved.
90
4
5
Always press the “MENU/OK” button after the
settings are completed.
SET-UP
When the Photography mode is selected with world
time set, “ß” appears on the LCD monitor for 3
seconds.
FRAME NO.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier as it makes sure that file
names are not duplicated when images are
downloaded to a PC.
●
!
When the camera settings are “q RESET”, the frame
number setting (“CONT.” or “RENEW”) is changed to
“CONT.” and the frame number itself does not return to
“0001”.
●
!
When the xD-Picture Card already contains image files with
file numbers higher than the highest file number on the last
xD-Picture Card, images are stored beginning from the
highest file number on the current xD-Picture Card.
AA
BB
CONT. RENEW
Formatted xD-Picture Card used for both
A and B.
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers,
while the first 3 digits show the directory number.
●
!
When changing the xD-Picture Card, always turn the
camera off before opening the battery cover. Opening the
battery cover without turning the camera off may cause the
frame number memory to not function.
●
!
File number runs from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999–9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
When “t” appears, see P.118.
File number
Frame number
Directory number
Upon returning from a trip, always change the
World time setting back to “
å HOME”.
✽ How to display the SET-UP menu (➡P.85)