FujiFilm HS10 Digital Camera User Manual


 
124
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
Warning
Description
Description
Solution
Solution
B (red) The batteries are low.
Insert fresh or fully-charged spare batteries.
A (blinks red) The batteries are exhausted.
k
Slow shutter speed. Picture may be blurred. Use the  ash or mount the camera on a tripod.
s
(displayed in red with
red focus frame)
The camera can not focus.
• Use focus lock to focus on another subject at the same
distance, then recompose the picture (pg. 34).
• If the subject is poorly lit, try focusing at a distance of
about 2 m (6.6 ft.).
• Use macro mode to focus when taking close-ups.
Aperture or shutter
speed shown in red
The subject is too bright or too dark. The picture
will be over- or under-exposed.
If the subject is dark, use the  ash.
FOCUS ERROR
Camera malfunction.
Turn the camera o and then on again, taking care not to
touch the lens. If the message persists, contact a FUJIFILM
dealer.
TURN OFF THE CAMERA AND
TURN ON AGAIN
LENS CONTROL ERROR
NO CARD
No memory card inserted when
E COPY is se-
lected in the playback menu.
Insert a memory card.
CARD NOT INITIALIZED
The memory card or internal memory is not for-
matted or the memory card was formatted in a
computer or other device.
Format the memory card or internal memory using the
K FORMAT option in the camera setup menu (pg. 109).
The memory card contacts require cleaning.
Clean the contacts with a soft, dry cloth. If the message is
repeated, format the memory card (pg. 109). If the mes-
sage persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer.