Filter
Top Products
38
N Using the Flash (Intelligent Flash)
When the ash is used, the camera’s Intelligent Flash system instantly analyzes the scene based on
such factors as the brightness of the subject, its position in the frame, and its distance from the camera.
Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed while
preserving the e ects of ambient background lighting, even in dimly-lit indoor scenes. Use the ash
when lighting is poor, for example when shooting at night or indoors under low light.
1
Raise the ash.
Press the ash pop-up button to raise the ash.
Turning the Flash O
Lower the ash where ash photography is prohibited or to capture natural light-
ing under dim light. At slow shutter speeds, k will be displayed to warn that
pictures may be blurred; use of a tripod is recommended.
2
Choose a ash mode.
Press the selector right (N), and then press the selector left or right to high-
light one of the following options and press MENU/OK (depending on camera
settings, some modes may not be available).
Mode
Mode
Description
Description
A (AUTO FLASH, no icon)
The ash res when required. Recommended in most situations.
N (FORCED FLASH)
The ash res whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
O (SLOW SYNCHRO)
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).