Filter
Top Products
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
4.1 Cleaning material and locations requiring cleaning (Continued from the previous page)
2. Locations requiring cleaning
Part Names of parts
Using cleaning paper with
Cleaner F1
Using Cloth with Cleaner F1 Using Cotton swab with Cleaner F2
per 10,000 scans per 10,000 scans When stains are persistent
Flat bed Document holding pad Yes
Document bed Yes
ADF Chute roller Yes
Pick arm Yes
Pick roller Yes Yes
Pick belt Yes Yes
Separation roller Yes Yes
Brake roller Yes Yes
Feed roller Yes Yes
Plastic roller Yes Yes Yes
Sheet guide/glass Yes Yes
Ultrasonic sensor
Clean this part with a dry lint-
free cloth.
You have to clean the scanner frequently as following cases :
● Scan a smooth surface document such as a coated paper.
● Scan a printed document almost fill in the paper.
● Scan a processed with chemicals document such as carbonless paper.
● Scan a document having a high calcium content.
● Scan a lot of penciled document.
CAUTION
Do not clean rubber parts with Cleaner F2.
1 | 2
All Rights Reserved, Copyright (C) PFU LIMITED 2003