Fujitsu FI-6130Z Photo Scanner User Manual


 
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
109
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Cleaning Materials
For more information about the cleaning materials, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Location and Frequency
6.1 Cleaning Materials and Locations that Require Cleaning
Name Part No. Notes
Cleaner F1 PA03950-
0352
100 ml
Moisten a cloth or Cleaning
Paper with this liquid to wipe the
scanner clean.
It may take a long time to dry if
an excessive amount is used.
Use it in small quantity. Wipe off
the cleaner completely to leave
no residue on the cleaned parts.
Cleaning Paper CA99501-
0012
10 sheets
Use this non-woven sheet with
Cleaner F1.
Cleaning Wipe PA03950-
0419
24 packets
Pre-moistened with Cleaner F1.
It can be used instead of
moistening a cloth with Cleaner
F1.
Cotton swab Commercially available
Dry cloth
In order to use the cleaning materials safely and correctly, read
the precautions on each product thoroughly.
Location Frequency
ADF Brake roller Every 5,000 sheets
Pick roller
Idler roller
Glass
Ultrasonic sensor
Feed roller
Eject roller
Flatbed
(fi-6230Z/
fi-6240Z)
Document pad
Document bed
Plastic frame
Cleaning cycles may vary depending on the condition of the
documents. Also, cleaning must be performed more frequently
when the following types of documents are scanned:
z Smooth-faced documents such as coated paper
z Documents with printed text/graphics that almost cover the
entire surface
z Chemically-treated documents such as carbonless paper
z Documents containing a large amount of calcium carbonate
z Documents written in lead pencil
z Documents on which the toner is not sufficiently fused