Fujitsu FI-6130Z Photo Scanner User Manual


 
Appendix
Appendix
Glossary
Introduction
Index
Contents
191
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
TOP
*1: The minimum scanning area (A8 size) only applies to using the ADF. There is no limitation when using the flatbed.
*2: Long page scanning supports documents with a length up to 3,048 mm (120 in.).
For documents longer than 864 mm (34.02 in.), the resolution must be set to 200 dpi or less.
Scanning
speed
(A4 landscape)
(*5)
Binary
(black & white)
Simplex: 40 ppm
Duplex : 80 ipm
Simplex: 60 ppm
Duplex : 120 ipm
200 dpi
Grayscale
Color
Binary
(black & white)
Simplex: 30 ppm
Duplex : 60 ipm
Simplex: 40 ppm
Duplex : 80 ipm
300 dpi
Grayscale
Color
Loading capacity (*6) 50 sheets Paper weight: 80 g/m² (20 lb)
Total thickness: 5 mm or less
Optical resolution 600 dpi -
Output
resolution
Binary
(black & white)
50 to 600 dpi, 1200 dpi
50 to 600 dpi: configurable in 1
dpi increments
1200 dpi: available from scanner
driver
Grayscale
Color
Grayscale level 8-bit for each color 10-bit during internal processing
Halftone pattern Dither/error diffusion -
Interface (*7)(*8) USB 2.0/1.1 (*9) B Type
- Ultra SCSI Shielded 50-pin high-density type
Other Hardware real-time JPEG compression -
Item Specification Notes
fi-6130Z fi-6230Z fi-6140Z fi-6240Z