Filter
Top Products
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
114
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
3 When you press the [Send to] and [Scan/Stop] buttons at the
same time, the feed/eject rollers rotate a certain amount.
4 Put a piece of cloth moistened with Cleaner F1 or a sheet of
Cleaning Wipe against the roller surface, and wipe horizontally.
Wipe the whole surface by pressing the [Send to] and [Scan/Stop]
buttons at the same time to rotate the rollers.
Make sure that it is cleaned properly because residue on the roller
will affect the feeding performance.
As a guideline, pressing the [Send to] and [Scan/Stop] buttons
seven times will rotate the feed/eject rollers one revolution.
4 Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24).
Be careful not to touch the rollers with
your hand while they are rotating.
Confirm that the ADF is closed properly. Otherwise, the
document may not be fed into the ADF.
Check
Function
Send to
Scan
/Stop
Power
[Send to] button
[Scan/Stop] button