Grundig GV 4592 VPT / MADRID Camcorder User Manual


 
Allgemeiner Teil / General GV44…, GV45…, GV46…
1 - 48 GRUNDIG Service-Technik
3. Playback
Freeze-Frame Stepping,
Forwards or Reverse*
Press the
K
button during playback (playback pause).
By turning the jog knob you can view the previous or the fol-
lowing individual freeze-frames step by step (see illustration).
»JOG
II
«
appears in the display of the recorder.
Depending on the direction in which you turn the knob, you
can select the previous or the following freeze-frame.
Press the
J
button to switch back to playback.
Next
freeze-frame
Next
freeze-frame
Next
freeze-frame
Preceding
freeze-frame
Preceding
freeze-frame
...
...
Preceding
freeze-frame
Freeze-frame
R
e
v
e
r
s
e
F
o
r
w
a
r
d
Changing the Slow-Motion Speed,
Forward or Reverse*
During playback, turn the shuttle-ring to switch to forward or
reverse slow motion.
Turning the jog-knob reduces the slow motion speed (see
illustration).
The following appears in the display of the recorder:
»SLOW
j
II
«
or
»SLOW «
Depending on the direction in which you turn the knob, the
slow motion speed increases or decreases.
By turning the shuttle-ring you can set any desired slow-
motion speed.
Press the
J
button to switch back to normal playback.
F
a
s
t
e
r
S
l
o
w
e
r
Outer ring
Adjust slow motion in reverse
direction
Outer ring
Adjust slow motion in forward
direction
* You may experience picture disturbance with long-playing mode and NTSC playback.
l
Fast Tape Wind
Press the
`
button.
At the beginning or end of the tape, the recorder switches to
stop. Terminate tape winding with the
`
button.
Locating a Certain Tape Position/
GO-TO Function
This function allows you to automatically wind the tape to a
certain position.
There are two ways of doing this:
by entering the playing time, or
by entering the tape position.
Go-to by entering the playing time
If the tape position is displayed, switch to the playing time
display by pressing the
o
button.
Press the
k
button. You will see this in the display of the
recorder:
»GOTO«
and "–––".
Now enter the desired playing time as three digits with the
numbered buttons
1
...
0
, then press the
OK
button.
Example:
Press the
k
button, enter the playing time (e.g. 48 min-
utes) with the numbered buttons
048
, then press the
OK
button.
When the last entry is completed, the tape is wound to the
respective position and playback is started.
Stop Fast forward windFast rewind
R
e
v
e
r
s
e
F
o
r
w
a
r
d
Go-to by entering the tape position
If the playing time is displayed, press the
o
to switch to
the tape position time display.
Press the
k
button, then enter the desired tape position as
three digits with the numbered buttons
1
...
0
.
Press the
OK
button to start the Go-to function.
Example:
Tape is at position
»I:30:00«
Desired tape position =
»0:0I:00«
Enter the following =
k001¶
OK
.
The last two digits are not entered.
Locating a Certain Recording/
Automatie Programme Finder (APF System)
This system allows you to locate the beginning of any of your
own recordings quickly and accurately.
For this, electronic "marks" (VISS marks = Video Index
Search system) are automatically placed at the beginning of
each of your own recordings.
The "marks" can be entered as one or two-digit numbers.
Example:
The tape is wound to the beginning and you wish to see the
5th recording. Press the
k
button, then the numbered but-
ton
5
for the fifth mark, and then turn the shuttle-ring to the
right.
You will see this in the display of the recorder:
»APF «
.
The tape is automatically wound to the beginning of the 5th
recording and playback is started there.
If you wish to see the 3rd recording – related to the beginning
to the tape – after the 5th recording (= 6th mark), then you
must go back 3 recordings (= 4 marks) by pressing the
k
,
button, then the numbered button
4
, and then turning the
shuttle ring to the left.
You will see this in the display of the recorder:
»APF
h
«
.
The tape is automatically wound to the beginning of the 3rd
recording and playback is started there.
For selecting the playing time with non-standard hours-
cassettes, you must first press the
l
button, then enter
the total playing time with the numbered buttons
1
...
0
and then confirm with the
OK
button.
4. Fast Tape Wind and Search Functions
h