Filter
Top Products
26
FORMATTING CARDS
The camera is only able to read and write to storage media
that have been formatted correctly. New cards sometimes
have no formatting, or you might want to convert a card that
is currently using a format that the camera cannot read. In
either case, you must reformat a CF card in the sensor unit
for H5D use.
There are two ways to format cards. The quickest way is to
use the Format card button on the grip but if you prefer, you
can also use the menu on the sensor unit.
FORMAT BUTTON
Press the Format button on the camera grip. It is purposely
recessed to avoid unintentional use, so use a ball-point pen
or similar. A prompt is displayed on the sensor unit for con-
firmation.
FORMAT VIA SENSOR UNIT
SENSOR UNIT MENU > STORAGE > FORMAT > DIALOGUE
1. Press MENU.
2. Navigate to Storage (use the Rear scroll wheel or the
Navigator).
3. Navigate to Format (use the Front scroll wheel or the
Navigator).
4. Navigate to Format dialogue (use the Front scroll
wheel or the Navigator).
5. Confirm by pressing OK (Display button).
Note
Only UDMA/type 4/60MBs (or 400x)
cards or better are recommended for
H5D use.
See full list in Appendix in this
manual.
Note
All CF cards should be formatted in
the sensor unit before first-time use!
Navigator Display
Zoom
Menu