62
• Image Orientation
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS >
IMAGE ORIENTATION
Sets the viewing orientation of captures when they appear in Phocus. In or-
der to avoid unintentional orientation changes when the camera is pointing
straight up or down, for example, the orientation setting can be locked at:
OPTIONS: Auto, Lock at 0 degrees, Lock at 90 degrees, Lock at 180 degrees and
Lock at 270 degrees.
• Show Preview
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS > SHOW PREVIEW
Sets whether the display remains inactive after each capture. Useful in sensitive
environments or when shooting vertically.
OPTIONS: After Exposure, Never
• Power Off:
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS > POWER OFF
Sets the amount of elapsed time before the camera enters ‘Power Down’ mode.
See ‘Power Modes’ section in this manual for further details.
OPTIONS: 30 min, 60 min, Never
SETTINGS > SERVICE
SERVICE
SENSOR UNIT MENU > SETTINGS > SERVICE
SaveLogdata saves a log file on the CF card.
Default Settings resets all sensor unit settings back to factory settings. See the
Appendix in this manual for a detailed list of the default settings.
Tethered power offers options when using a Thunderbolt to FireWire adapter, for
example, on a MacBook Pro. This particular configuration does not supply enough
power to the camera from the computer so in this case the “From camera” option
should be selected. Select “From host” for all other configurations.
1. Press MENU.
2. Navigate to Settings (use the Rear scroll wheel or the Navigator).
3. Navigate to Service (use the Front scroll wheel or the Navigator).
4. Navigate to required item (use the Rear scroll wheel or the Navigator).
5. Press the True Focus ( ) or AE-L (
) buttons – (or the ZOOM button) – to
step through options.
6. Save the chosen selection by pressing EXIT (MENU button).
Select this option when using
a Thunderbolt to FireWire
adapter.
Select this option when using
other configurations than
a Thunderbolt to FireWire
adapter.
