HP (Hewlett-Packard) A430 Photo Printer User Manual


 
To install the remote battery
1. Remove the battery compartment cover from the back of the remote.
2. Insert the supplied battery as shown with the + side up.
3. Slide the cover back into place.
Optional accessories
There are several optional accessories available for the printer that enhance its portability
for printing anywhere, anytime. The appearance of the accessories may vary from what
is shown.
For camera accessories, see the camera User Guide.
HP Photosmart Internal Battery
The HP Photosmart Internal Battery lets you take the printer with you wherever you go.
The printer battery light on the control panel and the camera image display indicate the
status of an installed HP Photosmart Internal Battery.
Printer connected to AC power
The printer battery light is on if the battery is fully charged, flashing if the battery is
charging.
The camera image display shows a solidly filled battery icon if the printer battery is
fully charged and a battery animation if the battery is charging. If you dock a fully
charged camera, no battery icon is displayed and the camera battery light on the
printer control panel is off.
Printer running on battery
The printer battery light is off.
The camera image display shows nothing if the battery is fully charged.
The camera image display shows icons for Low, Very Low, and Empty. Depending
on the camera model, the display may also show icons for Full, Very Good, and
Good. Messages also appear on the camera image display.
Chapter 1
10 HP Photosmart A430 series printer