3. Make sure the camera is turned off.
4. Press the camera into the dock so that the connector tab in the camera dock plugs
into the connector slot on the bottom of the camera.
5. In most cases, docking the camera turns on both the printer and the camera. If it
does not, press On on the printer control panel.
Note While the camera is docked, the camera image display dims after eight
minutes of inactivity. The camera image display turns back on if you send a print
job from a connected computer or device with Bluetooth wireless technology, or
if you press any button on the printer. After ten idle minutes, the camera image
display turns off completely. Press On on the printer control panel to wake the
display.
Print from a docked camera
Printing photos directly from the docked camera is the easiest and fastest way to turn
your digital photos into outstanding prints. This section contains the following topics:
● View photos to print
● Print photos
● View photos to print
● Print photos
View photos to print
You can browse and print from the camera image display.
You select the photos you want to print by using the printer control panel. Make sure the
camera has photos on its internal memory or on an optional memory card and is in the
camera dock.
Note You can also view your photos on a television, after connecting the printer
to the monitor with the supplied video cable. See View photos on a TV.
To view photos one at a time
➔
Browse the photos on the camera by pressing
or on the printer control panel.
To view photos as thumbnails
1. View photos as thumbnails by pressing Zoom - on the printer control panel.
2. Browse the thumbnails by pressing the 4–way arrow button on the printer control
panel. The current photo (1) is highlighted with a yellow frame.
Chapter 4
18 HP Photosmart A430 series printer