Filter
Top Products
12
INSTALLATION
UNPACKING THE UNIT
1. Make sure the shipping box is top-side up before opening.
2. Remove the accessories box and check the box’s content for the
following items:
• Product Manuals
• Power Supply
• Communication Cables
• Remote Scale Display Pole (Optional)
3. Carefully remove the platter and store it in a safe location until the
unit is properly installed into the checkout counter.
4. Remove all loose packing materials from the box.
5. Lift the MS2320 scanner out of the box by carefully grasping both
sides near the center of the unit and lifting directly up. Refer to
Figure 13 for hand placement.
Important! Do not remove the MS2320 scanner from the box by
grabbing the shipping foam. This can result in the unit
falling!
6. Carefully remove the shipping foam from around the
MS2320 scanner.
Figure 11
Figure 12
Figure 13
Figure 14