Filter
Top Products
54
SCANNER AND CABLE TERMINATIONS
SCANNER PINOUT CONNECTIONS
The StratosH scanner terminates to 10-pin modular jacks located on the bottom of the unit. The serial number label indicates the
model number and interface of the scanner. When using the RS232/Full Speed USB/RS485 (-121) interface, the USB and RS485
interfaces are not active at the same time.
EAS In
Auxiliary RS232 In
Pin Function
Pin Function
1 EAS In
1 Ground
2 EAS Out
2 RS232 Receive Input
3 RS232 Transmit Output
DC Power In
4 RS232 RTS In
Pin Function
5 RS232 CTS Out
1 12VDC
6-8
No Connect
2 Ground
9 +5V Out
3
5.2VDC
10
No Connect
Figure 63. Connector Layout on the Bottom of the Scanner
Scanner RS485 to Host
Scanner RS232 to Host
Pin Function Pin Function
1 Signal Ground 1 Signal Ground
2 RS232 TX Output 2 RS232 TX Output
3 RS232 RX Input 3 RS232 RX Input
4
Reserved for RS232 Interface
4 RS232 RTS Output
5
Reserved for RS232 Interface
5 RS232 CTS Input
6
Reserved for RS232 Interface
6 RS232 DTR Input
7 IBM B- 7
Reserved for RS485 Interface
8 IBM B+ 8
Reserved for RS485 Interface
9
No Connect
9
No Connect
10
No Connect
10
No Connect
Scanner USB to Host
Pin Function
1 Signal Ground
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 Data +
7 PC+5VDC
8 Data -
9
No Connect
10 Shield Ground
Specifications are subject to change without notice.