IBM 22Y Security Camera User Manual


 
FRU information (service only) 115
1 Nameplate
2 Bezel assembly
To remove the nameplate, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the side cover (see “Removing the side cover”
on page 44).
4. Remove the bezel assembly (see “Bezel assembly” on
page 114).
5. Press the release latch toward the guide tabs and gen-
tly press until the nameplate lifts off.
Main bezel
Before you begin:
Read “Safety information” on page 155.
Review the information in “Before you begin” on page
43.