Filter
Top Products
50 Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
1 Bay A
2 Bay B
3 Bay C
4 Bay D
5 Bay E
6 Bay F
7 Bay G
To remove or install a drive, you must turn off the server first.
Diskette drives, tape drives, and CD-ROM drives are remov-
able media drives. You can install removable media drives
in bays A, B, C, and D. You can install hard disk drives in
bays B, C, E, F, and G.
• The server comes with a 3.5-inch, 1.44 MB diskette
drive in bay D, an IDE CD-ROM drive in bay A, and a
hard disk drive installed in bay G (in some models).
• The Netfinity 3500 M20 server supports only one dis-
kette drive.
• The diskette drive uses 1 MB and 2 MB diskettes. For
optimum use, format 1 MB diskettes to 720 KB and for-
mat 2 MB diskettes to 1.44 MB.
• Bay B comes without a device installed. This bay is for
either a 5.25-inch, half-high, removable-media drive,
such as a tape backup drive, or a 3.5-inch SCSI slim
high hard disk drive. If you install a 3.5-inch hard disk
drive in this bay, you must use the 3.5-inch conversion
kit for a 5.25-inch bay supplied with the option.
M20
Netfinity 3500