IBM 22Y Security Camera User Manual


 
80 Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
Starting the Netfinity Manager
installation program
For instructions on installing Client Services for Netfinity
Manager, see the documentation listed in “Getting more
information about Netfinity Manager” on page 106.
To start the Netfinity Manager installation program on a sys-
tem that is running Windows NT 4.0:
1. Start the computer with your operating system.
2. Place the
ServerGuide Netfinity Applications
CD into
the CD-ROM drive.
3. Follow the instructions for your operating system
below:
OS/2 Warp Server
a. From a command prompt, type
x:
where
x
is the CD-ROM drive letter, and then
press Enter.
b. Type
SCOS2
and then press Enter. The ServerGuide Net-
finity Applications windows opens.
c. Select IBM Netfinity Manager from the
Available Applications selection list.
Note: To install Client Services for Netfinity
Manager, select Client Services for
Netfinity Manager from the Available
Applications list and then refer to the
Client Services for Netfinity Manager
User’s Guide
for additional installation
instructions.
d. Click Install Product to start the installation
process.
Windows 95, 98, or NT
a. Click the Start button.
b. Click Run... from the Start button menu.
c. Type
x:\SCW95
where
x
is the drive letter of the CD-ROM
drive in the Command Line field and then
click OK. The ServerGuide Netfinity Applica-
tions windows opens.
d. Select IBM Netfinity Manager from the
Available Applications selection list.
Note: To install Client Services for Netfinity
Manager, select Client Services for
Netfinity Manager from the Available
Applications list and then refer to the
Client Services for Netfinity Manager
User’s Guide
for additional installation
instructions.
e. Click Install Product to start the installation
process.