Filter
Top Products
Page 4
Installation
TM-6710/6710CL High-Speed Progressive Scanning CCD Camera
2 Installation
The following instructions are provided to help you to set up your video camera system quickly and
easily. We suggest that you read through these instructions prior to unpacking and setting up your
camera system.
2.1 Getting Started
2.1.1 Unpacking Instructions
We recommend that you save the original packing cartons for the cameras in case you need to return or
exchange an item.
We also recommend that any equipment being sent to another location for field installation be bench
tested to assure that everything works together properly.
2.1.2 Components List
Please begin by checking your order against the Components List (below) to assure that you have
received everything as ordered, and that nothing has been overlooked in the packing materials. If any
item is missing, please contact your PULNiX representative immediately.
• TM-6710 or TM-6710CL camera
• Tripod mount
• TM-6710 /TM-6710CL manual (if ordered)
• Warranty card
• Document information card
2.1.3 Accessories and Options
Following is a list of additional accessories or equipment that may be recommended or required for your
particular application. Please check with your PULNiX representative prior to the installation of your
video system to determine what you might need.
• RS-232 cable (Part #CS-232-B912 for the TM-6710 camera)
• Digital cable (Part #50DG-02LP for the TM-6710 camera. Contact the factory for frame-grabber
specific cables.)
• PD-12UUP power supply or PD-12UU power supply with 12P-02S cable
• 26CL-02-16 Camera Link cable (for TM-6710CL camera)