| Date/Time Settings
Select
_I_6_K_D3;......................
i i_i iiii_iiiiiiiii_
The date/time is recorded onto the tape at all
times, but its display can be turned on or off.
( pg.34, 35)
Perform steps ! - 3 in "Language Settings"
( "pg. 14).
1 Select "DISPLAY", press SET or >.
2 Select "CLOCK ADJ", press SET or >.
3 Select the desired date display format,
press SET or >.
• Repeat this step to input time display format
(Select from "24h" or "12h'), month_ date_ year,
hour and minutes.
4 Press MENU.
SET
Press < whenever you want to return to the
previous menu screen/setting.
| ViewfinderAdjustment
1 Set the Power Switch to "REC" while
pressing down the Lock Button located on the
switch.
2 Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
3 Turn the Diopter Adjustment Control until
the indications in the viewfinder are clearly
focused.
Example:
O
GETTINGSTARTEDEN 15
_ BrightnessAdjustmentOf The
Display
Select
SET
Perform steps 1 - 3 in "Language Settings"
(pg. 14).
• To adjust the brightness of the viewfinder,
pull out the viewfinder fully and set
"PRIORITY" to "FINDER" ( " pg. 34).
I Select "DISPLAY", press SET or >.
Select "BRIGHT", press SET or >.
3 Select the appropriate brightness, press
SET or >.
4 Press MENU.
Press <"whenever you want to return to the
previous menu screen.
| TripodMounting
To attach the
camcorder to a tripod,
align the direction stud
and screw to the
mounting socket and
stud hole on the
camcorder. Then
tighten the screw
clockwise.
• Some tripods are not
equipped with studs.
Diopter Adjustment Control
CAUTION;
When retracting the viewfinder take carenot to
pinchyour fingers.