Filter
Top Products
30 EN ADDITIONAL FEATURESFORD.S.C
ToPrintBySelectingStillImagesAnd
NumberOf Prints
1 Perform steps 1 - 3 in "To Print All Still
Images (One Print For Each)"(pg.29).
2 Select "CURRENT",
press SET or >.The DPOF
screen appears.
3 Press < or > to select
the desired file.
Select
4 Press v or/\ to select the number
indication (00), and press SET.
S Select the number of prints _ Select
by pressing/\ to increase the
number, or v to decrease the
number, and press SET.
=T
• Repeat steps 3 through 5
for the desired number of
prints.
• The number of prints can
be set up to 15.
• To correct the number of
prints, select the image
again and change the number.
6 Select"RETURN",press DPOF
SET.The "SAVE?"
appears.
• Ifyou did not change any
settings in step 3 through
5, the DPOF Menu
reappears.
7 Select "EXECUTE", press SET,
• To cancel selection, select "CANCEL'.
ToResetTheNumberOf Prints
1 Perform steps 1 - 3 in "To Print All Still
Images (One Print For Each)"(pg.29).
2 Select "RESET", press SET or >. The
DPOF screen appears.
3 Select "EXECUTE", press SET.
• To cancel selection, select "RETURN".
• The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above never disconnect
power as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with DIS"
de-activated ( pg. 32) this can be avoided.
I InitializingAMemoryCard
You can initialize a memory card any time
After initializing, all files and data stored in the
memory card, including those which have
been protected, are cleared.
1 Perform steps 1 - 3 in "Normal Playback
Of Images" ( "pg. 27).
2 Press MENU, _ Select
3 Select "FORMAT", press SET
or >. The FORMAT screen
appears.
• Press < whenever you want to
return to the previous menu _ SET
screen.
4 Select "EXECUTE", FORMAT
press SET.The memory
card is initialized.
• When initialization is
finished, "NO IMAGES
STORED" appears.
• To cancel initialization, select "CANCEL'.