Filter
Top Products
34 EN MENUSFORDETAILEDAD3USTMENT
DISPLAY
3d=1Ko]D},'d
The "DISPLAY" settings (except "CLOCK
ADJ.", "16:9 OUTPUT" and "BRIGHT") are
effective only for shooting.
LCD: Keeps the camcorder's display (except
the date, time and time code) from appearing
on the connected TV screen.
[LCD/TV]: Makes the camcerder's display
appear on screen when the camcorder is
connected to a TV.
:1=htj[o]d=!
•if:t [o]:1i i'I
DT:_d=radl_l=l
[OFF]: The date/time does not appear.
ON: The date/time is always displayed
• The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control.( pg. 23, 42)
D]_Lv_[o2ILVj[o]D__l
=,,]a[oZ_[q;1D]I!i
pg. 15, "Date/Time Settings"
IdlLVd_[_o] D]_
[OFF]: Time code is not displayed.
ON:Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording.(pg.20)
* Available onlywhen the VIDEO/MEMORY
Switch is set to VIDEO".
i[.'_J][o]lJld"i_lJld
To enable your tv to display images in 16:9
wide mode, set the tv screen size correctly.
4:3 rv: For TV with an aspect ratio of 4:3.
[16:9,rV]: For TV with an aspect ratio of 16:9.
:]:i[€]:ii
pg. 15, "Brightness Adjustment Of The
Display"
SYSTEM
The "SYSTEM" functions which are set when
the Power Switch is set to "REC" are also
applied when the Power Switch is set to
"PLAY".
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is
performed. It also activates the shutter sound
effect.( pg.26, 36)
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
[LCD]:The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER:The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used
to confirm how these functions operate.
Demonstration starts in the following cases:
• When the Menu Screen is closed after "DEMO
MODE" is turned "ON".
• With "DEMO MODE" set to "ON" if there is no
operation for about 3 minutes after the Power
Switch is set to RED".
• Performing any operation during the
demonstration stops the demonstration
temporarily, If no operation is performed for
more than 3 minutes after that, the
demonstration will resume.
NOTES:
• Ifa cassette is in the camcorder the
demonstration cannot be turned on.
• DEMO MODE" remains ON" even if the
camcorder power is turned off.
PT:ILvA:1:@]a d
[CANCEL]: Does not reset all settings to the
factory-preset.
EXECU,rE: Resets all settings to the factory-
preset.
I:1 _[ttl!:Ttt :l
E]$_ / £_,o1 / _ / [ENGLISH] /
FRANCAIS / ESPAI_IOL / PORTUGU_:S
The language setting can be changed.
( "pg. 14)