Filter
Top Products
| NormalPlayback
VIDEO/ VOL +/-
MEMORY
Lock Button
BLANK
I_/11
_ql.il -
Power
V[DEOPLAYBACK EN 21
NOTES:
• The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
( pg. 23)
• IfStop mode continues for 5 minutes when
power is supplied from a battery, the carncorder
shuts off automatically.To turn the camcorder on
again, push back and pull out the viewfinder
again or close and re-open the LCD monitor.
• When a cable is connected to the AV connector,
the sound is not heard from the speaker.
• Speaker
1 Load a cassette.( pg. 16)
2 Set the VIDEO/MEMORY Switch to
"VIDEO".
3 Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
SET
Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.
StillPlayback
_Q
Pauses during video playback. ,_
1) Press I_/IIduring playback, a.
2) To resume normal playback, press I_/11
again.
Z
• Ifstill playback continues for more than about
3 minutes, the camcorder's Stop mode is
automatically engaged.
• The above screen (referring to the control lever
( "pg. 7)) will be displayed for approx. 3
seconds on the LCD Monitor.
Operation To select
I-/11 Move the control lever up.
• Move the control lever down.
Move the control lever right.
_1_1 Move the control lever left.
4 To start playback, press ,/11.
•15To stop playback, press i.
• During Stop mode press _ to rewind or I_1_
to fast-forward the tape.
• Press SET to display the guide operation
screen.
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/-)
towards "+" to turn up the volume, or towards
"-" to turn down the volume.