Filter
Top Products
| ConnectionsToA TV OrVCR
To AV
connector
Audio/Video cable
(provided)
OYellow to VIDEO IN (Connect when your TV/
VCR has only AN input connectors.)
ORed to AUDIO R IN*
_lWhite to AUDIO L IN*
* Not required for watching still images only.
VIDEOPLAYBACKEN 23
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4 Turn on the camcorder, the VCR and the
TV.
5 Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6 Start playback on the camcorder.
( " pg. 21 )
• Please set "16:9 OUTPUT" of Playback Menus
so that the image may suit your TV (16:9 TV or
4:3 TV). ( "pg. 34, 35)
To choose whether or not the following
displays appear on the connected TV
• Date/Time '_o_
Set "DATE/TIME" to ON" or OFF" (pg.35). ,_
Or, press DISPLAY on the remote control to turn
on/off the date indication.
• Time Code _=
Set "TIME CODE" to "ON" or OFF" ( "pg. 35).
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", LCD" or "LCD/TV"
( pg. 35).
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery
pack.( pg. 13)
• To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder's Power Switch
to"REC" then set your TV to the appropriate
input mode.
• Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.