Filter
Top Products
E-32
Setting Up the Camera Using an RM-P2580
ALARM TITLE Setup
Use the ALARM TITLE screen to set the alarm titles to be displayed when an alarm signal is transmitted.
Up to 10 alarm titles (ALARM TITLE 1 to 10) can be set and each title can be up to 12 characters in length.
1.
Select the camera. (
☞
RM-P2580 Instruction manual)
CAMERA button
→
Numeric key (camera number)
→
ENTER but-
ton.
The picture of the selected camera is output.
2.
Display the SETUP menu on the camera.
(
☞
P. 18, steps
1
to
4
)
MENU button (3 sec.)
→
Select “CAMERA” with the PAN/TILT lever
→
SET button.
The camera moves to the home position.
3.
Tilt the PAN/TILT lever up or down to move the cur-
sor (>) to “CAMERA TITLE/ALARM” and press the
SET button.
The TITLE/ALARM screen is displayed.
4.
Move the cursor (>) onto the item “ALARM TITLE
EDIT” and press the SET button.
• The ALARM TITLE 1 menu is displayed.
• The first few characters in the character area and title input field
blink to indicate that the system is ready for a title input.
5.
Tilt the PAN/TILT lever to select the first character
of the title from the character area.
• The character being selected blinks.
• The selected character is displayed in the title input field.
6.
Press the TELE button.
• The first character of the title is input, and the system gets ready
for the input of the second character.
• If the WIDE button is pressed, the blinking position in the title in-
put field moves to the left. Use this facility to correct previously
input characters.
7.
Press the FAR button.
• The next ALARM TITLE screen is displayed.
• If the NEAR button is pressed, the previous ALARM TITLE screen
is displayed.
8.
Repeat steps
5
to
7
for each alarm title.
Complete the input of all the alarm titles (ALARM TITLE 1 to 10) in
this way.
9.
Press the MENU button.
• The screen returns to the previous menu.
RM-P2580 units need to be configured to display Alarm Titles. Use the RM-P2580 menu settings
to do this:
1. Press and hold the MENU button for 3 seconds to display the SETUP screen on the remote control unit.
2. First select the CONTROL UNIT screen, then the DATA I/O screen and finally the INPUT ASSIGNMENT screen.
3. Select “ALARM TEXT” then “EDIT 1”, the alarm title set as ALARM TITLE 1 is displayed on the monitor.
* The alarm signals are input into the DATA I/O terminals on the rear panel of the RM-P2580.
SETUP
MENU SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO F-1 F-2 F-3
PAN/TILTLENS
CAMERA/POSITION
CAMERA POSITION
REMOTE CONTROL UNIT
RM-P2580
ALARM
POWER
KEY LOCK
PAN/TILT
lever
CAMERA
buttons
WIDE button
FAR button
TELE button
NEAR button
ENTER button
SET button
MENU button
SETUP menu on camera
CAM. FUNCT ION. .
–––MENU–––
CAM. TITLE/ALARM. .
CAM. VIDEO ADJUST. .
CAM. ALC/ExDR. .
HOME MOTION DETECT . .
AUTO PAN/PATROL/TRACE. .
POSI .FUNCTION SET. .
FACTORY SETTINGS. .
TITLE/ALARM menu
CAM.TITLE EDIT. .
–––CAMERA TITLE/ALARM
–––
AREA TITLE OFF
AREA TITLE EDIT..
ALM.TITLE SIZE DOUBLE
ALM.TITLE COLOUR WHITE
ALARM TITLE EDIT. .
ALARM INPUT. .
ALARM OUTPUT. .
0123456789ABCDEFGHIJK
–––ALARM TITLE 1– ––
LMNOPQRSTUVWXYZ
abcdefg
hi jklmnopqrstuvwxyz., '
– :/ÄÖÜÂÊÎÔÛÇÑäëïöüâêîô
ûáéíóúàèìòùçñß¡¿
TITLE NO.SELECT
→
FOCUS
←
WIDE TELE
→
Character area
ALARM TITLE screen
Title input
field
Blinking
Space Blinking