Filter
Top Products
25
EN
Registering Files to Events
If you select an event to register the file to
before starting recording, you can find the file
easily at playback.
Preparation:
•
Select the recording mode.
•
Select ! mode.
1 Touch MENU.
2 Select [REGISTER EVENT].
3 Select the event.
The selected event is displayed on the
screen.
To quit the screen
Select [QUIT].
To search by event
See page 32.
NOTE
Once you select a certain event to register a
file, the setting will remain even if you turn off
the camera.
Capturing Still Images in a Movie
You can capture still images while recording
a video.
Preparation:
•
Select the recording mode.
1 Set the recording dial to ! mode.
2 Touch the shutter mode and select
RECORD ONE SHOT or CONTINUOUS
SHOOTING.
•
RECORD ONE SHOT: Records one still
image.
(There will be no indicator display on the
LCD monitor when recording one image.)
•
{ CONTINUOUS SHOOTING: Records still
images continuously.
RECORD ONE SHOT
After performing steps 1-2
3 Press SNAPSHOT.
CONTINUOUS SHOOTING
After performing steps 1-2
3 Select the continuous shooting mode
from the menu.
•
Select from HIGH SPEED /
MEDIUM SPEED / LOW SPEED.
4 Press and hold SNAPSHOT.
•
Recording ends when SNAPSHOT is
released.
•
When capturing still images during video
recording, the continuous shooting mode
is fixed at [LOW SPEED] regardless of the
setting.
•
When capturing still images in the recording
standby mode, you can select from all the
modes ([LOW SPEED] / [MEDIUM SPEED] /
[HIGH SPEED]).
•
The display during medium and high speed
recording is as follows.
Red: Number of recorded images
Green: Saving in progress