Filter
Top Products
40
EN
Operating in Conjunction with TV via HDMI
Connecting the camera to an HDMI-CEC-
enabled TV using the HDMI cable allows you
to utilize the following convenient functions.
•
HDMI-CEC (Consumer Electronics Control)
is an industry standard that enables
interoperability between HDMI-CEC
compliant devices that are connected via
HDMI cables.
NOTE
•
Not all HDMI-control devices comply with
the HDMI-CEC standard. The HDMI control
function of the camera will not work when
connected to these devices.
•
The camera is not guaranteed to operate
with all HDMI-CEC-enabled devices.
•
Depending on the specifications of each
HDMI-CEC-enabled device, some functions
may not work with the camera. (For details,
refer to the instruction manual of your TV.)
•
Unintended operations may occur with some
connected devices. In these cases, set
[HDMI CONTROL] to [OFF].
Preparation:
•
Connect an HDMI cable between the camera
and the TV. (Z p. 38)
•
Turn on the TV and set the HDMI-CEC
related setting to on. (For details, refer to the
instruction manual of the TV.)
•
Turn on the camera and set [HDMI
CONTROL] to [ON]. (Z p. 73)
Operation method 1
! Turn on the
camera.
# Select the playback
mode.
$ Connect the HDMI
cable.
TV turns on
automatically and
switches to HDMI
input mode when the
camera is turned on.
Operation method 2
Turn off the TV. The camera turns off
automatically.
Operation method 3
•
Depending on the TV connected, the display
language of the camera will automatically
switch to the language that is used selected
for the TV when the camera is turned on.
(This is applicable only if the camera
supports the language selected for the TV.)
To use the camera with a language that
differs from the display language of the TV,
set [HDMI CONTROL] to [OFF].
NOTE
•
The display language of the TV will not
switch automatically, even if the display
language of the camera is changed.
•
These functions may not work correctly when
devices such as amplifier and selector are
connected. Set [HDMI CONTROL] to [OFF].
•
If HDMI-CEC does not work properly, turn off
and on the camera again.