Filter
Top Products
35
EN
Menus Settings: [ ] = Factory-preset
=
WB
Adjusts the white balance to
achieve the optimum colors
for the amount of light in your
surroundings during recording.
@ [AUTO] : White balance is adjusted automatically.
3 MANUAL :
B MWB : Adjusts the white balance manually depending on
the light source.
1) Hold a sheet of plain white paper in front of
the camera so that the white paper fills the
screen.
2) Keep touching
OK until the B indicator
appears.
D FINE : When shooting outdoors on a sunny day.
E CLOUD : When shooting outdoors on a cloudy day.
F HALOGEN : When a video light or similar type of lighting is
used.
- BACKLIGHT COMP.
Backlight compensation
brightens the subject by
increasing the exposure.
1 [OFF] : Deactivates the function.
0 ON : Activates the function.
PHOTOMETRY AREA
Enables you to adjust the
brightness in the desired spot
when backlight compensation
does not work well.
6
[WHOLE SCREEN] : Brightness is adjusted automatically
for whole screen.
7
SPOT : Brightness for the specified spot is adjusted
automatically.
Move the spot frame left and right by touching
&
or
%
,
then touch OK.
(! mode only)
w EFFECT
Enables you to record videos or
still images with special effects.
1 [OFF] : No effect is used.
J SEPIA : The image has a brownish tint like old still images.
K MONOTONE : The image becomes black and white like old
movies.
L CLASSIC FILM : This effect skips frames to give images of
an old movie atmosphere.
M STROBE : The image looks like a series of consecutive
snapshots.
5 MACRO
Enables you to shoot a
subject as large as possible
at a distance of approx. 4 cm
(1.58 in).
1 [OFF] : Normal shooting (Enables close-up shots up to the
distance stated below)
Tele (T) side: Approx. 50 cm (1.64 ft)
Wide (W) side: Approx. 50 cm (1.64 ft)
0 ON : Macro shooting (Enables close-up shots up to the
distance stated below)
Tele (T) side: Approx. 30 cm (0.98 ft)
Wide (W) side: Approx. 4 cm (1.58 in)
NOTE
Set [MACRO] to [OFF] if you will not take close-up still images.
Non-close-up still images will be blurred if [MACRO] is set to [ON].
NOTE
Depending on the operation mode, some menu settings may be fixed and are unavailable for
selection. In this case, it will be displayed in gray.