Filter
Top Products
51
EN
DPOF Print Setting
This camera is compatible with DPOF (Digital
Print Order Format). You can set which images
to be printed and the number of prints with this
camera. This feature is useful to print with a
DPOF-compatible printer or take the SD card
to a photo lab for printing.
Preparation:
•
Select the playback mode.
•
Select # mode.
1 Touch MENU.
2 Select [DPOF].
Setting Files Individually
After performing steps 1-2
3 Select [SET PRINT QUANTITY].
4 Select the desired file.
•
To check the content of the file, select
[CHECK].
5 Select the number of prints. (max. 15
prints)
•
Slide your finger up and down on the
sensor. You can set the value by using the
touch sensor.
•
To set print information for other images,
repeat steps 4 and 5. (You can set up to
999 files.)
•
To cancel the selection
Set the number of prints to “00” in step 5.
Setting All Files Together (One Print for
Each File)
After performing steps 1-2 (Z left column)
3 Select [SET ALL 1].
4 When [SET ALL TO 1?] appears,
select [YES].
To quit the screen
Select [QUIT].
To confirm DPOF settings
In step 3, select [CHECK QUANTITY].
•
If necessary, change the number of prints
for the desired file by following steps 4 and
5. (“Setting Files Individually”, left column)
To reset DPOF settings
1) In step
3, select [RESET].
2) When
[RESET PRINT QUANTITY?]
appears, select [YES].
Print Setting