Filter
Top Products
34
EN
Menus Settings: [ ] = Factory-preset
N FOCUS
Adjusts the focus.
@ [AUTO] : The focus is adjusted automatically.
3 MANUAL:
@ A : Adjusts the focus manually. (When zooming, the
subject will not go out of focus if you adjust the focus at
the telephoto (T) side before zooming to the wide angle
(W) side.)
FOCUS ASSIST
Assists you to adjust the
focus.
The image becomes black and white. The outline of focused
object is displayed in blue.*
*You can change the color of the outline, which is set to blue by
default. (See page 71. FOCUS ASSIST CAMERA)
Use this for adjusting the focus more precisely.
Adjust the focus, then select [SET] to fix the focus.
g ADJUST BRIGHTNESS
Allows you to adjust brightness.
! mode
@ [AUTO] : The brightness is adjusted automatically.
3 MANUAL:
–6 to +6
: Corrects the brightness within this range in
increments of 1.
# mode
@ [AUTO] : The brightness is adjusted automatically.
3 MANUAL:
–2.0 to +2.0 (EV)
: Corrects the brightness within this range in
increments of 1/3EV.
9
SHUTTER SPEED
A fast shutter speed can freeze
the motion of a fast-moving
subject, and a slow shutter
speed can blur the subject to
give the impression of motion.
! mode
@ [AUTO] : The shutter speed is adjusted automatically.
3 MANUAL:
1/2 to 1/4000
: The smaller the value, the faster the shutter
speed.
# mode
@ [AUTO] : The shutter speed is adjusted automatically.
3 MANUAL:
1/2 to 1/500
: The smaller the value, the faster the shutter
speed.
NOTE
It is recommended to use the tripod when recording with a slow
shutter speed.
<
APERTURE PRIORITY
You can add a blurring effect to
the background by setting the
aperture value (F-number).
@ [AUTO] : The aperture value is adjusted automatically.
3 MANUAL F3.4 to F5.6:The lower the F-number (larger
aperture value), the more blurred the background will
become.
The higher the F-number (smaller aperture value), the
clearer the focus will be for both near and far objects.
Slide your finger up and down on the sensor to set the
value.
Manual Recording (Continued)