Filter
Top Products
105
5-4 Setting Using the Web Browser (9. Auto Pan Setting)
Auto Pan Setting window:
http://
******
/autopan-e.html ("
******
" represents the URL of VN-C625)
1
Mode
For setting the mode of Auto Pan operation.
(Set value: Right, Left, Return)
2
Speed
For setting the speed of Auto Pan operation.
(Set value: Normal, High, Low)
3
Current
Displays the current Pan/Tilt/Zoom positions.
4
PAN/TILT/ZOOM
For manual Pan/Tilt/Zoom operation. Manual
operation is possible only when you are clicking
one of these buttons.
5
Start Position
For setting the start position of Auto Pan
operation. Specify the angle of view and zoom
position for the start position using Pan/Tilt/
Zoom
4
, followed by clicking [Set].
To check the Auto Pan start position that has
been set, click [Move].
6
Return Position
For setting the return position of Auto Pan
operation. Specify the angle of view and zoom
position for the return position using Pan/Tilt/
Zoom
4
, followed by clicking [Set]. To check
the Auto Pan return position that has been set,
click [Move].
7
Quality
Upon clicking , the current image will
switch to the image quality setting during Auto
Pan operation.
The same settings will also be applied during
Auto Trace operation. To adjust the image
quality, do so using the [Image Settings] screen
by clicking
.
8
[Apply] and [Save] Buttons
Click
to apply settings and to save the
set values.
Click
to apply settings without saving the
set values. These settings will be cleared upon
turning off the power of VN-C625, and the
previous settings will be restored.
1
8
2
3
4
5
6
7
[Image Settings] Screen
C625_p95-p114 05.3.23, 10:18 AM105