JVC VN-C625 Security Camera User Manual


 
20
1-2 Attachment of Ceiling Mount
1.
Attach safety wire to prevent camera
from falling down
Connect the ceiling slab or channel to the
ceiling mount using the wire to prevent the
camera from falling down. Make use of the
safety wire mounting hole to connect the
ceiling mount and the wire.
(See diagram on the left)
Choose a wire and ceiling structure with an
appropriate strength and length that may
prevent danger in case the camera falls down.
Attach to Ceiling Slab or Channel
Safety Wire
Safety Wire Mounting
Hole
Ceiling Mount
Cautions
Preparation (Step 1 Connection/Installation)
Notes
Connect the wire so that it can be insulated
from the ceiling structure.
If the ceiling structure is made of a metallic
material, improper insulation with the
camera may cause noise interference in
the images.
Safety wires are not provided. Please
purchase commercially available wires on
a separate basis.
Caution
Attachment of a embedded cover in the ceiling
(recess bracket) may be mandatory in certain
regions. If this is so, ensure that the embedded
cover (recess bracket) is securely attached
before installing the camera.
Please refer to the instruction manual for the cover
in use for details on installation of the embedded
cover (recess bracket).
•For more detail, please contact the JVC.
Ceiling
Embedded Cover in Ceiling (recess bracket)
C625_p2-24 05.3.17, 5:11 PM20