Filter
Top Products
98
Operations (Step 5 Setting Using the Web Browser)
5-4 Setting Using the Web Browser (4. PAN/TILT Setting)
This section describes procedures to perform various PAN/TILT settings.
1
PAN/TILT Speed
For performing settings related to the speed of
Pan/Tilt operation.
1(Low), 2 to 7, 8(Fast):
For selecting the speed of Pan/Tilt operation.
The larger the value, the higher will be the
Pan/Tilt speed.
According to ZOOM, speed of operation is
made variable.:
Alters the pan/tilt speed automatically
according to the zoom of the lens.
The speed lowers when the zoom position
is set to the Tele-end, and increases when
set to the Wide-end.
2
Auto Flip
Inverts images on the screen according to the
camera angle. Set this function when shooting
an object that passes beneath the camera.
OFF :Auto Flip is disabled.
Mode 1 :
The image rotates 180˚ horizontally
and stops when the object comes
beneath the camera. In this case, the
camera and pan/tilt operations
function in the same direction.
Mode 2 :
The image rotates 180˚ horizontally
when the object comes beneath the
camera, and direction of the camera
and pan/tilt operations function in
opposite direction. Set this function
to enable continuous operation.
Mode 3 :
The image rotates 180˚ horizontally
when the object comes beneath the
camera. The camera and pan/tilt
operations, which are in opposite
directions to each other, will be
aligned upon a lapse of at least 10
seconds.
Click to apply settings and to save
the set values.
Click
to apply settings without
saving the set values. These settings will
be cleared upon turning off the power of
VN-C625, and the previous settings will
be restored.
1
2
PAN/TILT Setting window:
http://
*****
/configpantilt-e.html ("
*****
" represents the URL of VN-C625)
C625_p95-p114 05.3.4, 6:56 PM98