Filter
Top Products
36
2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting)
Alarm Input
• When there is an input of signals to the alarm input terminal on the ceiling mount.
(
☞
Page 16 "Alarm Input Terminal")
• When motion is detected. (
☞
Page 46 "Motion Detection Setting")
• Upon movement to a new position.
• When there is a change in the Black & White mode.
Operation when an alarm input is activated
• Output signals are sent from the alarm output terminal on the ceiling mount.
(
☞
Page 17 "Alarm Output Terminal")
• Alarm packets are sent to the PC. (
☞
Page 39 "Message Packet")
• The camera shifts in position.
• Black & White mode changes.
• Images are uploaded to the FTP server. (
☞
Page 50 "FTP Client Setting").
• Quits all operations. (
☞
Page 39 "Shutdown")
1.
Start up the "VN-C625U Setup Tool" and select [Alarm].
This section describes procedures for alarm setting.
2
3
4
1
Settings (Step 2 Network Settings)
C625_p25-41 05.3.4, 5:29 PM36