Filter
Top Products
40
Ⅵ Alarm Input (Continued)
Item
Function/Set Value
Press here to display the IP address of the PCs to which an
alarm notification is sent. ("Distribution Address List" Screen)
To delete a distribution address, select the IP address to de-
lete, followed by pressing the Delete button.
2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting) (Continued)
Settings (Step 2 Network Settings)
Initial Value
—
4
List
Ⅵ Other Triggers
Item Function/Set Value
For performing the following operations by using movement to
preset positions as triggers.
*Please refer to the [Alarm 1/2] item for details on the set val-
ues.
For setting alarm operations when motion is detected within
the area specified in the motion detection settings.
*Please refer to the [Alarm 1/2] item for details on the set val-
ues.
For performing the following operations by using switches
between the Color and Black & White modes as triggers.
*Please refer to the [Alarm 1/2] item for details on the set val-
ues.
Initial Value
—
*
Please
refer to
the [Alarm
1/2] item
for the
initial
values.
—
*
Please
refer to
the [Alarm
1/2] item
for the
initial
values.
—
*
Please
refer to
the [Alarm
1/2] item
for the
initial
values.
5
Preset Position
• Mode
• Alarm Output
• Black & White
•
Message Packet
6
Motion Detection
• Mode
• Alarm Output
•
Message Packet
• Alarm FTP
7
Black & White
• Mode
• Alarm Output
• Go to a preset
position
• Return Mode
•Interval
•
Message Packet
Notes
• The list allows setting of up to 10 addresses.
• Message packets will not be sent out when there are 11 or
more addresses.
Note
• The Black & White alarm may be activated upon
restarting VN-C625.
C625_p25-41 05.3.23, 10:06 AM40