24 A-61579 February 2007
¾Accessing the Scanner Log
To access the full Operator Log in the scanner from SVT follow these steps:
¾
NOTE: Operator Log entries with a date and time of 01/01/1970 00:00 are normal when the
scanner is first turned on. The scanner uses this default time and date for all logs until
the scanner can connect to a host computer and download the current local data and
time.
[01/01/1970 00:00 docs=682] id=020 Power on self test completed
[01/01/1970 00:00 docs=682] id=280 Lamps ready for scanning
[01/01/1970 00:00 docs=682] id=359 Lamps not ready for scanning
Each student should launch the Scan Validation Tool and navigate to the full Operator
Log.
1. Click the SVT
Setup button.
2. Click the
Settings button.
4. Click the
Diagnostics
button.
3. Click the
Device
button.
5. Click the
Logs tab
and select
Operator
Log.